Pointer Clicker is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Read more

How to Raise/Lower an Office Chair Without a Lever? 3 Solutions For You

Do you want to adjust the height of your office chair but you can’t find the lever?

I’m glad to tell you that you’ve come to the right place to solve this problem!

There are three common reasons why your office chair might not have a lever to adjust the height.

The first one is that you might have an older executive chair that is adjusted using large screws instead of the more common pneumatic lift.

Your office chair might also be damaged and missing the height adjustment lever.

And the last reason is that your office chair might not have any adjustment functionality by design.

We are going to take a look in more detail at each of these problems and how you might solve them.

So keep reading!

Older Non-Pneumatic Office Chair

black leather non pneumatic office chair

The chairs you see in most business offices and home offices have pneumatic lifts that make it very easy to adjust the height.

But office chairs weren’t always made with pneumatic lifts.

Back in the day, they had to be manually adjusted.

If you cannot find the height adjustment lever on your office chair, there’s a big chance you have one of these older office chairs.

So how do you adjust the height on these older office chairs?

Let’s find out!

How to Adjust the Height of an Old Non-Pneumatic Office Chair

Adjusting the height of an old non-pneumatic chair isn’t as simple as pushing a lever.

These older office chairs have threaded posts, so you will need to turn the chair clockwise or counterclockwise to adjust the height.

Step 1

The first step is to determine the height you will need to adjust your office chair to.

Ideally, the height of your office chair should be equal to the distance between the floor and the middle of your knee joint.

So measure the distance from the floor to the middle of your knee joint while standing up.

Then measure the distance from the floor to the seat of your chair.

Take note of the difference.

Step 2

Most of these older chairs have a small lock that prevents you from accidentally readjusting the height.

You might need to flip your chair over to locate this lock and unfasten it.

It is usually a small screw at the base of the chair that you will need to loosen with a screwdriver.

Step 3

Once the lock has been loosened, you can flip the chair back to its normal position and begin adjusting the height.

Turn the chair clockwise to lower the seat and counterclockwise to raise it. Keep a foot at the base of the chair to prevent the base from turning with the seat.

One full turn of the seat raises or lowers it by approximately ¼ inch.

Use the measurements you took on step one to determine how many full turns you will need to get the right height.

Make sure to test it by sitting on the chair before reinserting the lock.

Step 4

Once you have the perfect height, reinsert the lock and tighten it.

Try to reinsert the lock without flipping the chair over again to avoid messing up your height adjustment.

After you complete step four, you’re good to go!

Damaged/Missing Office Chair Lever

Office Chair Lever

What if your office chair is a pneumatic chair…

…but for some reason the lever is damaged or completely missing!

The best thing you can do is to take your office chair to the nearest furniture repair shop and ask them to fix it for you.

But if you’re a bit a handyman yourself, there are some things you can do to solve this problem right at home.

Makeshift Adjustment Lever

Using a makeshift adjustment lever to raise and lower your office chair is actually quite easy, given that the rest of the pneumatic lift is working properly.

What you need to do is locate the very top of the cylinder on your pneumatic lift.

You might have to flip your chair over to get a better angle.

Once you find the tip of the cylinder, you will see a small protruding pin. When this pin is pushed down, it releases the piston at the bottom of the pneumatic lift.

If the piston is released, you can then raise or lower your office chair.

You can use any long object as your new makeshift lever. This can be a screwdriver , a ruler , a spatula , or whatever you can find lying around your house.

Secure your new makeshift lever in place using some duct tape  so it doesn’t fall off and you’ll be good to go!

Lever Replacement

If you want a more permanent fix, you will need to replace the missing lever.

If you go on the internet and search for a replacement lever, chances are you won’t find what you need.

This is because office chair adjustment levers are not usually sold separately.

You will need to purchase a new office chair mechanism with a lever, like this one from ChairPartsOnline.

chairpartsonline Replacement Office Chair Knee Tilt Mechanism - 7.87" x 5.95" Mounting Holes - S4388
  • The pivot point of this style of tilt mechanism is further forward than on conventional tilt...
  • 7.87" x 5.95" mounting screw hole pattern (mounting hardware not included)
  • Single lever for gas cylinder height activation / adjustment and tilt lock-out

Once your new mechanism arrives in the mail, the next step would be to replace your old one.

To learn how to properly take apart your office chair and replace the mechanism, refer to our How to Take Apart an Office Chair article.

When the repair is complete, your office chair will be back in the game! You’ll be able to raise and lower it with just a touch of the lever.

For more information on how to fix your office chair, you can refer to our How to Fix: Office Chairs section on our website.

Non-Adjustable Office Chairs

Non-Adjustable Office Chairs

What if the chair you have cannot be raised or lowered by design…

…but you really need to adjust the height to match your desk?

This is a call to stir up your creative juices!

We’re now going to share with you a few tricks you can follow to fix the height issue on your office chair.

Seat Cushions

If your office chair lacks height, one of the easiest ways to get some elevation is by using seat cushions.

You can use anything from a random throw pillow lying on your couch, to a fancy plush foam cushion with anti skid pads.

Sale
Plush Solid Colour Chair Cushion,Round Foam Seat Cushion Thickened Anti Skid Chair Pad Home Office Decoration Futon C Diameter 31"x9"(80x25cm)
  • Perfect Decoration - These Cushions Are Not Only Suitable For Indoor Use,Such As Family Chairs And...
  • Comfortable - Sit In Comfort For Years To Come!we Do Not Recommend Leaving These Chair Pads...
  • EASY CARE - Strength And Durability And Built Into Every Inch.to Top It All Off,These Cushions Are...

What matters is that you get the ideal seat height with your seat cushion.

We recommend this seat cushion from ComfiLife.

Sale
ComfiLife Premium Comfort Seat Cushion - Non-Slip Orthopedic 100% Memory Foam Coccyx Cushion for Tailbone Pain - Cushion for Office Chair Car Seat -...
  • ASSISTS IN BACK PAIN & SCIATICA RELIEF: Ergonomically designed, provides support and comfort while...
  • ALL-IN-ONE PREMIUM HIGH-DENSITY MEMORY FOAM CUSHION: ComfilLife's all-in-one features are unrivaled:...
  • GREAT FOR OFFICE CHAIR, DRIVING AND TRAVELING: Provides comfort on most hard surfaces; office chair,...

It has an orthopedic memory foam cushion that will add height to your seat and also help prevent tailbone pain.

Plus it’s got anti skid pads like the fancy plush foam pillow we mentioned!

To learn more about adding height to your office chair, you can read our article here: How to Make an Office Chair Higher.

You may also read our review on the 10 Best Seat Cushions for Office Chairs.

Desk Elevation Blocks

What if your problem is that you need to lower your office chair to match your desk?

To save you from having to cut up your office chair, you can purchase desk elevation blocks instead.

These blocks will raise the height of your desk so it will match the height of your office chair.

What we recommend are these anti-slip elevation blocks from Utopia Bedding.

Sale
Utopia Bedding Furniture and Bed Risers (Pack of 8) - 2 Inch Stackable Square Risers for Sofa, Table, and Chair Lifts up to 10,000 Lbs - includes...
  • The set includes 4 anti-slip foam pads for the top and 4 anti-slip rubber pads for the bottom of the...
  • Each of the 8 risers provides an elevation of up to 2 inches and is able to lift 10,000 lbs...
  • Bed risers are constructed using the highest quality plastic which makes it capable of holding up...

They are made from durable plastic and they can be stacked up for extra height.

Make sure to check the size and the height of these blocks before you make a purchase. You don’t want to end up with something that is too tall or too short.

Conclusion

So there you have it! From now on, whenever you encounter an office chair without a lever to raise or lower it, you’ll know how to solve the problem.

Just to recap, here’s a bullet list of the solutions we provided in this article:

  • For older office chairs: Find and unfasted the lock screw and turn the seat clockwise to lower the seat and counterclockwise to raise it.
  • For damaged/missing levers: Create a makeshift lever or order a replacement mechanism.
  • For non-adjustable office chairs: Get a seat cushion to add height to your chair or desk elevation blocks for your desk.

Last update on 2020-09-28 / Affiliate links / Images from Amazon Product Advertising API.


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.