Pointer Clicker is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How To Clean Elite Projector Screens?


Elite projector screens are a great way to display presentations and videos, whether educational or commercial.

But over time, projector screens can get dirty, making it hard to see the images.

When that happens, how do you clean Elite projector screens?

We have found that the cleaning method depends on what Elite projector screen model you have because each model has a different screen material and a different grain. In general, you can use a soft, lint-free cloth to wipe off dust and dampen it with warm, soapy water to clean off stains.

How to Clean an Elite Projector Screen

If you have an Elite projector screen, the way you need to clean it depends on the model!

Projector and projector screen in a room

This is because each model varies in the screen material and the grain of the screen.

Some materials are more sensitive to cleansers, limiting them to dust or water cleaning only.

Meanwhile, some screens have a vertical grain, which means they need to be cleaned from top to bottom, while other screens have a horizontal grain, which means they need to be cleaned left to right.

We’ve broken down the common Elite projector models into groups that you can clean the same way. Join us as we dive into the details below!

How to Clean CineWhite, CineGrey, MaxWhite, Spectra White, and AcousticPro Elite Projector Screens

Elite Screens Spectrum 100" Electric Motorized Projector Screen
Click the image for more info

If you have a:

then you’re probably wondering how to clean it properly. 

If so, no need to worry!

White handkerchief on water background

If you have one of these models, you can clean it by following the simple steps below:

  • Get two white cloths that are free of any lint.
  • Prepare mild soap (like hand soap) and some warm water.
  • If you want to clean the surface of dust and dirt, dip the cloth into the warm water.
  • If you want to clean light stains or sticky spots, dip the cloth into warm, soapy water.
  • After dipping, squeeze out any excess water, so the cloth is damp.
  • Wipe the screen from top to bottom.
  • Do NOT wipe the screen in a circular fashion.
  • Clean from the left of the screen to the right.
  • When done, dry off the screen with the same movement.

If the screen is stained very badly, you can clean it with these steps:

  • Take a Q-tip.
  • Dip one side of the Q-tip in alcohol.
  • Use the wet side to wipe the stain gently.
  • Use the other side to dry off the spot.

Your projector screen should now be good as new!

How to Clean CineGrey Multi-Dimension, PowerGain, and AirBright Elite Projector Screens

Elite Screens Sable Frame CineGrey 3D Projector Screen
Click the image for more info

If you have a:

then you need to be more careful with how you clean them.

If you have one of these models, you can clean it by following the easy steps below:

  • Get two microfiber cloths that are free of any lint.
  • Prepare some warm water.
  • Dip one microfiber into the water and wring it out.
  • Blot the screen with the damp microfiber.
  • Work from top to bottom, starting from the left side.
  • Do NOT clean in a circular fashion.
  • Dry off with the second microfiber.
Formula 409 Multi-Surface Cleaner
Click the image for more info

If your projector screen has a tough stain or sticky spot:

  • Prepare a solution that is half Formula 409 and half warm water.
  • Spray this solution onto the microfiber cloth.
  • Clean the stain or sticky spot with the same movement.
  • Dry off with the second microfiber.

If the screen still has a stain after this, then it is permanent and cannot be cleaned.

How to Clean StarBright CLR and CLR 3 Elite Projector Screens

If you have a StarBright CLR or a CLR 3, then you’ll need to clean more regularly and gently than typical Elite projector screens. 

This is because Ceiling Light Rejection screen fabric is more sensitive to dust and dirt, requiring more maintenance.

Soft brush and microfiber cloth

If you have either of these models, you can clean dust off by using the steps below:

  • Get a soft brush or a lint-free microfiber cloth.
  • Gently wipe the dust off from left to right.
  • Do NOT wipe from top to bottom or in a circular fashion.

If you want to clean off dirt and stains, you can follow these steps:

  • Get two lint-free microfiber cloths.
  • For light cleaning, prepare some warm water.
  • Mix 1 part mild detergent with 1000 parts warm water for deeper cleaning.
  • Dampen one microfiber in the water.
  • Gently clean the screen from left to right. 
  • Do NOT clean from top to bottom or in a circular fashion.
  • Dry off with the other microfiber.

Your projector screen should now be clean and ready to use!

How to Clean CLR 2 Elite Projector Screens

Elite projector Screens Aeon CLR Series
Click the image for more info

If you have a CLR 2 projector screen, you can clean it by following these steps:

  • To clean off dust:
    • Get a soft brush or microfiber cloth.
    • Gently wipe it from left to right.
  • To clean off stains:
    • Get two microfiber cloths that are free of any lint.
    • Prepare warm water mixed with mild soap.
    • Dampen a microfiber in the water.
    • Gently wipe the screen from left to right.
    • Dry off with the other microfiber.

General Cleaning Tips for Elite Projector Screens

Elite ezCinema 2 Projector Screen
Click the image for more info

No matter what model you have, users should always follow these general cleaning tips:

  1. Don’t touch the screen material to avoid leaving fingerprints or stains.
  2. Use gloves when handling the projector screen.
  3. Don’t scratch it or use rough tools or cleaners that may leave scratches.
  4. Don’t let sharp points touch it.
  5. Don’t clean it with harsh chemicals like acetone, benzene, and alcohol.
  6. Never allow the solvent to dry on the screen.

If your Elite projector screen becomes damaged because these guidelines aren’t followed, the product warranty will not cover the repair.

Conclusion

How to clean an Elite projector screen varies from model to model since different models have different materials and grains. 

You can clean CineWhite, CineGrey, MaxWhite, Spectra White, and AcousticPro Elite projector screens by wiping them with a damp cloth in a top to bottom motion.

You can clean PowerGain, AirBright 3D2, and CineGrey 3D and 5D projector screens by wiping them with a damp microfiber in a top to bottom motion, starting from the left.

You can clean StarBright CLR and CLR 3 projector screens by wiping them with a damp microfiber in a left-to-right motion. 

You can clean a CLR 2 projector screen with a soft brush or a damp microfiber in a left to right motion. 

In general, don’t touch the screen with your hands or any rough or sharp objects. Don’t clean it with harsh chemicals, and never let the solvent dry on the screen.

We hope this article helped you!

Last update on 2022-08-14 / Affiliate links / Images from Amazon Product Advertising API.


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.